|February 15, 2012||Posted by Troy E. Taylor|
In the first part of this series we selected a mold for casting, assembled some 250 pieces for our dungeon tiles, planned what our modular dungeon tiles would look like and cut out mounting board pieces to fit.
Now we’re ready for the fun part — especially if you like building with Legos or Lincoln Logs or any similar toys — actually constructing our tile pieces.
1. Tile pieces, assemble!
The first bit of business is to do a dry-fit of our various pieces on the foam board cutouts. This way we know if we have enough pieces for the project, discover any that might be too flawed to use and get a feel for the construction itself.
For floor tiles, this is a simple matter of arranging them to fit on the mounting cutouts. But for more three-dimensional projects — such as doorways, stairs, a pedastal and the pool — this lets us plan out or test how the tiles are best used to build up dimension.
Planning prevents mistakes when it comes time to gluing. Here are the pieces laid out for the pedastal.
The key is to figure this all out before we start gluing. Once a piece is firmly glued on, you can only start over if there is a mistake.
My assistant for this part of the project, my 5-year-old son, Jonathan, who demonstrates dry-fitting the pieces.
What? No doors?
Over the years I’ve built a lot of doors. I obsessed over getting doors right for tile sets such as this. I’ve got molds that make wood doors, stone doors and metal doors. I’ve built closed doors and partially opened doors. I’ve constructed archways and door frames. I’ve even tried my hand at “secret doors” that slide and move. For those most part, they look pretty good.
This is what I’ve learned: Doors like those are a hassle. You have to swap out open and closed doors. Do you have a door that swings out or in? Even the “open” doors don’t allow enough room to let a mini stand in the doorway. And you can forget about moving a fig through an archway. It’s awkward and slows things down. Double doors are doubly problematic.
The solution: Don’t do it. If you need doors for, say a diorama, that’s a different matter. But any portal the players’ figs will likely pass through? Well, it’s better to build something like I did for this set, a U-shape that allows figs to be placed upon it just like any other tile. Any other depictions of the door, the materials used in its construction, the manner of its opening and hinging, are best left to a GM’s verbal description.
When it comes to game play, merely the “suggestion” of a doorway works best.
2. Get your glue on
I use Aleene’s craft glue for nearly everything I build with plaster. It’s got a stronger bond that ordinary school glues. But it’s also forgiving enough that you can fix mistakes before it dries completely.
A couple of things to keep in mind:
1) I use it pretty generously. I don’t treat it like mortar, so it’s seeping out between bricks and tiles, but speading it too thin results in a weak bond.
2) Once the glue dries, it repels craft paint. (Think about how difficult it is to add crayon to a spot of dried glue. The principle is the same). This is important. The less the glue gets on surface pieces, the better. I find I am washing my hands frequently during the gluing process to prevent adding tacky spots to surface areas.
I believe that gluing is Jonathan’s favorite part of the process.
Sometimes things don’t always line up perfectly or you need to create an oddly shaped piece, such as with a floor cut diagonally. For those times, you need a craft knife to trim accordingly.
In this house, only adults get to use the craft knife.
4. Looks good enough to use
You should now have a set of tiles you can use for your modular dungeon. And yes, you could put them into play — if you don’t mind your table getting white plaster scuffs on it. We’ll cover those bare plaster pieces in the next part.